Diesel Generator REHLKO V650 C2 IV
10500 uah
228000 uah
- Replacement in case of problems
- Service 24/7
- Rent with operator
- Transport services
| Nominal power, kW | 473.0 |
| Maximum power, kW | 520.0 |
| Power, kVA | 650.0 |
| Nominal voltage (V) | 400 |
| Engine displacement (cm3) | 16120 |
| Oil volume (l) | 48.0 |
| Fuel type | Diesel |
| Engine brand | Volvo |
| Country of origin | France |
| Engine part number | TAD1642GE-B |
| Number of phases | Three (400V) |
| Launch type | Electric start/Automatic |
| Fuel tank capacity, liters | 717.0 |
| Fuel supply, l/hour, 75% vol. | 88.9 |
| Autonomous operation, hours at 75% load | 8.1 |
| Automatic speed controller | Yes |
| Generator stop due to low oil level | Yes |
| Relay starting | Yes |
| Inverter type generator | No |
| Automatic power supply system | Yes |
| Cooling | Water |
| Execution | Open on frame |
| Frequency (Hz) | 50 |
| Generator technology | Brushless |
| Protection class | IP23 |
| Noise level, dBA/7m | 86 |
| Moving | Stationary |
| Length, cm* Width, cm* Height, cm | 3620 x 1892 x 1993 |
| Weight, kg | 4180 |
The Rehlko SDMO V650 – Compact (650 kVA) generator is an open-frame industrial diesel generator on a vibration-resistant steel frame, designed for long-term operation in prime or standby modes. The V650 C2-CV model is a high-performance power solution for large facilities, including manufacturing, logistics facilities, office centers, construction, agriculture, and infrastructure systems.
The generator is equipped with a proven industrial-grade, water-cooled diesel engine and a modern APM403 or APM802 control panel (depending on configuration). These controllers provide full monitoring, event logging, SCADA connectivity, and remote control support. Automatic transfer switch (ATS) is supported for continuous power supply in critical situations.
The compact frame design allows the station to be installed in technical rooms or under a canopy, and the reinforced chassis allows operation even in difficult construction or industrial conditions.
As an additional service, the “NovaRent” company delivers equipment, including oversized equipment, with loading / unloading at the place of delivery.
Delivery and removal from the facility “NovaRent” can be carried out both with its own transport (from 0.8 to 5 tons) and with the help of transport companies. We also provide services in the direction of “Rental of construction equipment with delivery”, we perform loading and unloading work on the site, and it is also possible to move equipment with the help of our equipment.
We will help choose the most optimal and convenient way for the client to transport the equipment (with a tow truck/manipulator/trawl/container truck) and, if necessary, provide truck crane services for loading/unloading the equipment.
The cost of delivery is calculated in each case by the manager individually.
Payment for rental services
Payment for equipment rental, delivery, and installation services can be made in cashless form on prepayment terms.
In the case of long-term rental of equipment, the rent is paid monthly in advance.