Mini crane Maeda MC 405 CRM-E
8040 uah
160200 uah
- Replacement in case of problems
- Service 24/7
- Rent with operator
- Transport services
| Power supply : | 3-phase 380 V, 7.5 kW |
| Fuel / Fuel tank capacity : | diesel / 60 liters |
| Rated power : | 7,5 kWt |
| Type of engine : | Yanmar 3TNV88-BPMB |
| Ground pressure : | 0.50 kg / cm² (0.52 kg / cm² CRME) |
| Ground dimensions caterpillars : | 1720 mm × 320 mm |
| Gradeability : | 20º |
| Travel speed : | 0 - 3.3 km / h |
| Dimensions maximum position outriggers : | 4980 mm x 1380 mm x 1980 mm |
| Type outrigger : | four multipozits. outrigger box. type with a stop. valves |
| Rotation angle / speed : | 360º circular movement without restrictions / 1.0 vol. / Min. |
| The angle of boom / time : | 0 - 80º / 17 sec |
| Boomtype : | Fully automatic five-section telescopic boom pentagonal cross section |
| Time telescoping : | 11.7 m / s 41.3 |
| Boom length : | 4,735 m - 16.475 m |
| Type the hoisting cable : | IWRC 6 × WC (26), a diameter of 8 mm × 92 m |
| Maximum speed hook : | 8 m / min (4-fold. Rec.) 72 m / min (with a one. Rec.) |
| Maximum lift height : | 16.8 m × 1,13 m |
| Maximum range : | 16 × 210 kg m |
| Dimensions (l / w / h) : | 4980 mm × 1380 mm × 1980 mm |
| Payload, kg : | 2.7 m × 3,83 m |
| Weight : | 5600 kg |
MC405 – the most powerful crane range of mini cranes MC with exceptional carrying capacity of 3.83 tons. The entire product line is different Maeda same high level of quality. Additional jib further increases the already impressive operating range.
- Warranty: 2 years
- load mode of movement with load of 500 kg
- Functions jib
- system of conservation
- Protection guide blocks inside the boom
- Two running speed (high and low)
- Programmable load moment
- hydrostatic transmission
- Centralized management
- four-or double-sheave hook block
- Automatic locking hook when not in use
- Tilt Sensor/Alarm
- Powerful two-speed winch with hydraulic disk brakes
- Remote Control
| Crane lifting | 3,83 x 2,7 m tons |
| Max. working radius | 16m x 210 kg |
| Max. height | 16,8 m x 1130 kg (20.7 m x 520 kg) |
| Hook speed | 10 m/ min. (18.0 m/ min.) (4 cable, a four-winding) |
| Single line speed | 40 m/ min. (72.0 m/ min) (four-layer winding) |
| hoisting rope | cable with a core of steel wire 6 x WS (26) A? 8 mm x 95 m |
| telescopic system | Boom length: 4,735 m – 16,475 m Telescoping speed: 11.7 m/ 54.2 sec (41.3 in). Type Boom: A fully automatic five-section telescopic boom section pentagonal. |
| System Boom | lifting angle/ speed: 0 º – 80 º/ 24,5 s (17.0 in) |
| Swing | 360 º/ 2,5 r/ min (2.1 rev/ min) |
| system outriggers | Type: Extension and staging direct drive hydraulic cylinders. dimensions to max . the extended position: 5786 mm (length) x 5118 mm (front) x 5520 mm (rear). |
| Chassis | Drive: Hydraulic motor, continuously variable transmission. Travel speed : 0 – 3.3 km/ h gradeability 20 º. Dimensions track: 2100 mm x 320 mm. Ground Pressure: 49.0 (0.50) kPa (kgf/cm2) . |
| Engine | Model: Yanmar 3TNV88-PMB. Type: Three-cylinder water-cooled diesel engine. Rated moschnost21, 8 kVt/2400 min-1 (29, 6 l.s./2400 rev/ min). Ignition Method: Electric. Fuel/ Fuel tank capacity : l Dizelnoe/60. |
| E toelectric engine MC405CRME | Type: Totally enclosed air-cooled engine. Size: four-phase, 7.5 kW or 380 V |
| Remote control | Type: Cable, micro-speed mode, the display of the transmitter, the control of the outriggers |
| Dimensions | L 4980 mm x W 1380 mm x H 1980 mm. Weight MC405CRM: 5600 kg. Weight MC405CRME: 5750 kg. |
| standard equipment | Blocking Block Switches, the index weight to be lifted , hydraulic safety valve, clamp the cable, the indicator of horizontality inclination alarm case, the mechanism of the external emergency stop, turn the lock lever, outrigger interlock device, moment limiter, rotating lamp, four-or double-sheave hook block. |
| Options | Radio, white rubber tracks, odnoshkivny hook, hook grip, jib. |
As an additional service, the “NovaRent” company delivers equipment, including oversized equipment, with loading / unloading at the place of delivery.
Delivery and removal from the facility “NovaRent” can be carried out both with its own transport (from 0.8 to 5 tons) and with the help of transport companies. We also provide services in the direction of “Rental of construction equipment with delivery”, we perform loading and unloading work on the site, and it is also possible to move equipment with the help of our equipment.
We will help choose the most optimal and convenient way for the client to transport the equipment (with a tow truck/manipulator/trawl/container truck) and, if necessary, provide truck crane services for loading/unloading the equipment.
The cost of delivery is calculated in each case by the manager individually.
Payment for rental services
Payment for equipment rental, delivery, and installation services can be made in cashless form on prepayment terms.
In the case of long-term rental of equipment, the rent is paid monthly in advance.
You may also like…
7080 uah
135000 uah
